Quantcast
Channel: SCN : All Content - SAP CRM: Master Data & Middleware
Viewing all 1796 articles
Browse latest View live
↧

Mass replication of Contact person from CRM to ECC

June 5, 2013, 6:23 am
$
0
0

Hi Experts,

 

I'm in strange situation,

 

A. I have run the report in CRM.  found 200+ entries (contact person) created in CRM and does not replicated to ECC.

 

B. Also i run the report in ECC, found 100+ (contact person) created in ECC and does not replicated to CRM. For this i run R3AR2 for main and relationship.  contact person those are not replicated from ECC to CRM are replicated successfully.

 

But for the case A i dont no how should i send Contact persons from CRM to ECC in bulk way.

 

Please give your input as early as possible.

 

Regards

Sreekar

↧
Search

CRM Upgradation issues

June 5, 2013, 7:28 am
$
0
0

Hi all,

 

We have upgraded to CRM, SAP_BASIS 702 0010  and BBPCRM 701 0007

                                      from SAP_BASIS 702 0009 and BBPCRM 701 0006.

                                             

since then we are getting dump while clicking on Create new account, button in IC role.

--------------------------------------------------------------------------

Dump is as follows

 

The following syntax error was found in the program

CL_CRMCMP_B_BUPACREATE0_IMPL==CP :

"Field "GV_CHECK_DUPL_ENTER" is unknown. It is neither in one of the sp"

"ecified tables nor defined by a "DATA" statement."

 

Termination occurred in the ABAP program "CL_BSP_PAGE_BASE==============CP" -
in "CREATE_PAGE".
The main program was "SAPMHTTP ".

In the source code you have the termination point in line 190
of the (Include) program "CL_BSP_PAGE_BASE==============CM01A".

 

---------------------------------------------

I tried to activate class CL_CRMCMP_B_BUPACREATE0_IMPL manually, but it showing syntax error. On quality all is working fine (as QTY is not upgraded yet).

 

Please reply.

 

Regards,

Nikhil

↧
↧

Pass the custom data from CRM to ECC using BDOC

June 5, 2013, 12:33 am
$
0
0

Hi All,

 

I have created new Z field using AET and i need to replicate the z-field to EC using BDOC into PSSC System

 

Currently my BDOC in SMW01 has Data in Z fields as well,

 

 

I need to pump in the data from CRM to a Z- field in PSSC_SXP Table.

 

I have added a Z-field using Append structure into the standard table and in the structure(Update ) also in ERP.

 

But i need a place to pump in the data from Bdoc Structure to the Z-field in ERP.

 

Can any one pls let me know how do i achieve this and watz the best place to code the same ??

 

ANy help is highly appreciated !!

↧

Bdoc Reprocessing Issue

June 7, 2013, 12:37 am
$
0
0

Hi All,

 

Im using sap crm 4.0

 

there are more then 60 thousand bdoc errors with message type "Identification category IBS001 is not assigned to any identification type"

 

I am having 3 questions

 

1. Please suggest??

so to reprocess these which method i can use for reprocessing all of them automatically or in bulk at a time because it is very tough to reprocess each through smw01.

 

2.Please suggest ??

How can i get list of all these bdocs(Identification category IBS001 is not assigned to any identification type) at one place.

 

3. Please suggest ??

How to use t-code SMW02A for getting all such bdocs in a same place and reprocess them.

↧

Need to transfer Custom IDocs from CRM4 to CRM7

June 10, 2013, 10:11 pm
$
0
0

Hi CRM Gurus,

 

I have requirement to transfer Sales Orders Idocs from CRM to CRM7. So we are using Standard Idocs CRMXIF_ORDER_SAVE_M2 with few custom fields. The standard IDOC CRMXIF_ORDER_SAVE_M2 has been enhanced to include custom segments and ZCRMXIF_ORDER_SAVE_M2 has been created. I have maintained the Sites and Site - Basic Type and Interface Type mapping in the source and target systems. However, the idoc when arrived in CRM 7 is not recognizing the structure and is erroring out displaying all the segments at first level.

 

I am new to CRM and this is a critical requirement. Please guide me. Thanks in advance for your help...!

Let me know if you require more information.

 

 

Thanks & Best Regards,

Anand Patil

↧
↧

How to avoid an entry in SMQ1 for BW Transfer

June 10, 2013, 10:48 pm
$
0
0

Hello,

in our scenario we create/change Business Partners via a service in BW. After that we transfer the created/changed BP to CRM (in some cases the Business Partner doesn't exist at that moment in CRM, so we create it there). This is done via a RFC function module.

After creation of BP we get back the BP GUID via a generic extractor. This is done only after a creation!

No we want to avoid the transfer back of that data to BW which was created/changed by that special process as we know already that data in BW.

And we want to avoid that transfer at the beginning and don't want to create an entry in the queue in SMQ1.

 

Here what we did until now:

  • I tried to enhance the method IF_EX_PARTNER_UPDATE~CHANGE_BEFORE_UPDATE of BADi PARTNER_UPDATE to avoid the function call BUPA_OUTBOUND_CREATE.
  • I called the function module BUPA_MWX_BDOC_PREVENT_UPLOAD during the change process to avoid the upload via middleware

Nothing bring the result we want to get: no entry in SMQ1.

 

We can avoid the transfer via a change of the extract process via customer exit. Here we can skip the transfer. But this is performance consuming and we have a large amount of entries in SMQ1 which must be processed even if it is clear that this is not necessary.

 

Does anybody know an additional trick to avoid the generation of an entry in the queue?

 

We use BW 7.1 SP 11.

 

Thanks for your help.

 

Andreas Steinke

↧

Is there a documentation on how to create a BDoc which serves as middleware between two CRM systems?

June 11, 2013, 2:28 am
$
0
0

Hi,

 

First of, I'm a beginner in Middleware so please be gentle:D

In our System landscape we have multiple CRM Systems and I was asked to develop a BDoc to synchronize our custom business objects. I already created the BDoc, the segments, and the adapter, but now I have to develop the function modules that help the Systems to map and process the data. My question is, if there is a kind of documentation where I can find a list of things that I have to implement and ideally how.

 

I hope you can help me,

Tim

 

P.S. There isn't a lot of mapping to do because the structures should be the same on both Systems.

↧

How to extend Product master Sales Area Data (CRM)

June 11, 2013, 11:46 am
$
0
0

Hi,

 

I've a requirement to enhance Product master sales area with custom field, and want to make this field as Sales area dependent and display it on the Web UI and should be able to populate the same in the BDOC.

 

I created a set type attribute and assigned Set type to a hierarchy in COMM_HIERARCHY with view ID as Sales & Distribution. I'm able to see attribute under Sales and distribution tab in Product master. Can someone guide me is this the correct way of extending sales area ? will this field be sales area dependent?

 

The other option i tried is creating through AET, I was not given any option for choosing the sales area specific BP, and field got extended to CRM_EXT_MAT table instead of Sales area specific tables.

 

Can any one help me with this?

 

Thanks

Priya

↧
Search

CRM BP Contract partner role not triggering SD customer creation

June 12, 2013, 5:48 am
$
0
0

Hi,

 

As per one of the requirement in my case I have my system setup in such a way that when a CRM BP (either via SAP GUI or WebUI) is created in Contract Partner role it replicates into the R/3 system and also creates two master record in R/3 - (a) Business Partner in Contract Partner role in R/3, (b) Customer record in R/3 with the same BP number - SD Customer (e.g. XD01).

 

Now it is working fine in every case, i.e. whenever a BP is created in CRM with Contract partner role, immediately a BP is created in R/3 with Contract partner role as well as a customer with the same CRM BP number (number range configured in this way).

 

But it looks strange in cases when a BP is first created in CRM with any role (Contact Person, Prospect, Business partner general etc.) other than Contract Partner role and later when these BPs are converted into Contract partner role (opening the BP in CRM and selecting contract partner role and then saving them) then the BP with contract partner role in getting created in R/3 but the SD customer is NOT getting created.

 

Hence in every scenario where a BP is first created with any non contract partner role and then converted to contract partner role in CRM it is creating BP will all required roles in R/3 but not creating the SD customer record in KNA1 table.

 

Any idea ?

 

Thanks and Regards,

Sumoy Sen.

↧
↧

Intermediate B-Docs

May 28, 2013, 5:46 am
$
0
0

Hi Everyone,

Huge number of B-Docs are not flowing to ECC from CRM, and staying in intermediate state.

 

Due to this issue data inconsistency is happening in both systems.

 

Can some please tell me how process those bdocs. (either status change to success or error).

 

Regards,

Raghu.

↧

Map Multiple Account groups of type Classification - Customer from CRM to the same account groups in ECC

June 13, 2013, 1:36 am
$
0
0

Hi ALl,

 

My requirement isas below:

 

I have two Account groups in CRM -> Both of type Sold - TO- Party. But with two different number ranges.

 

I need to replicate them into ECC in the same number ranges as in CRM.

 

for this i checked the ECC PIDE Settings. I could not maintain Two entries of type CLasisfication 'B' in CRM - R/3 .

 

I have seen two blogs :

 

http://scn.sap.com/thread/3223058

 

http://scn.sap.com/thread/3312846

 

Andrei Vishnevsky  said "

 

So probably you can implement the logic on CRM side to set this field automatically according, for example, to BP roles assigned to current BP.

 

Alternatively: you can grab DE_BALE event on ERP side and adjust E1KNA1M segment there. You can find more information on SCN regarding this option."

 

can u pls be more clear on how do i achieve this..

↧

CATS Integration for CRM service process

March 23, 2010, 10:31 pm
$
0
0

Hi,

I am working on CRM 7.0 and i am looking for CATS integration for service process in CRM.

Are there any middleware settings required for this integration?

What are the pre-requisites and other settings required for completing this process?

I have already gone through the help docs but now i am facing many issues in the system.

 

Regards,

PP

↧

Changes done to street in SR21 is not reflected in ADRC table

May 29, 2012, 12:28 am
$
0
0

Hi Experts,

 

I have changed the name of a Street using the transaction SR21 ( it changes the street name in the table ADRSTREET) . This change is not reflecting in all the BP's having the same street nor even in the data present in the ADRC master data table for address table.

 

 

Could you please guide me the steps i need to follow in-order to reflect the changes in the ADRC table.

 

 

 

Thanks and regards,

Madhukar.

↧
↧

Unable to find the Account Group field enabled in BP - Classification tab in SAP CRM

June 13, 2013, 2:17 am
$
0
0

Hi ALl,

 

I tried the link

 

http://scn.sap.com/thread/1685957

 

to enable the R/3 Account group in SAP CRM.

 

 

1.-Run transaction BUCG

2.-Add the role ZCRM01 ( Copy of CRM001 Sold To-Party)

3.-Double Click into ZCRM01 and select  CRM Clasificaction. Check R/3 Account Group as a required field. This is a mandatory requirement in this process

4.-Save  the settings

5.-Run BP Tx

6.-Click on Organization as BP Category

7.-Select ZCRM01 role in the BP Role field drop down list

8.-Maintain address data and click on Classification tab

 

But its not working ..

 

could not enable the Account group field in SAP CRM.

 

Pld find the screen sht attached..image 1.jpg

 

ANy suggestion pls..

↧

An extra sales org is added during product download from ecc to crm

June 9, 2013, 1:54 am
$
0
0

Hi,

 

In my downlaod of product from ecc to crm, i check ed the bdoc i am getting a single entry for sales org. In ecc also only 1 entry is present.

However if i check in crm DB table i find 2 entries.

 

 

Any pointers on this, please share

 

Regards

Chandrakant Kulkarni

↧
Search

Emp not replicating in CRM from ECC (HR)

September 27, 2011, 1:40 am
$
0
0

EMp from ecc is not getting replicated in CRM .when tried to find in BP t code in CRM it says BP does not exist. Even after successfully running PFAL cycle in HR.

It might stuck in Queues

So can anybdy tell me which ques to be checked specifically for emp data to replicate in crm

↧

Replicate BP in the same Custom BP Role from CRM to ECC

June 14, 2013, 2:34 am
$
0
0

Hi ALl,

 

We have created New BP Role in CRM : ZPRVDR under the role category : CRM000

and creating BP in CRM.

 

We need to replicate the BP in same BP Role( ZPRVDR ) in SAP ECC.

 

I have created a separate Number range and account group for this in SAP CRM.

 

No PIDE Settings are maintained and as soon as BP is created in CRM, its getting replicated in ECC.

 

But we need this BP in the role ZPRVDR( Same business role )

 

I tried to copy the MKK role in ECC to ZPRVDR but its giving me error while replciating BP from CRM to ECC.

 

" Standard Role ZMKK for the ROle category is not permitted "

Pls find the attached screen shot ..

 

ROle Category.jpg

Any hint on how to resolve this issue.

 

Kindly help me asap !!

↧
↧

Counter and Readings - Several Issues

June 14, 2013, 3:15 pm
$
0
0

Hi All,

 

I have several problems when trying to use counter and readings.

 

1. I have created a new Application Group in Tableview CRMC_MPK_APPGRP. But when I try to create counter, the system says that the application

    group is not active. This does not make so much sense to me (see Picture 1).

 

2. How can I assign this counter to me IBASE? What are the configuration steps to do that?

 

3. When I try to maintain a reading for my counter i got only the error message 'No Contract linked was linked. In SAP Note 1701929 it was described that     I same counter is assigned to several items than this error can occur. But my counter is not assigned to anything (see Picture 2).

 

Any help is highly appreciated.

 

BR/

 

Oliver

↧

IObject Creation - Category not available

June 14, 2013, 2:59 pm
$
0
0

Hi All,

 

I want to create an IObject inside an IBase, but the category is not available.

 

I did already the customizing step:

 

Cross-Application Components à SAP Product à Product Category à Assign Category Hierarchies to Applications

 

Any Ideas?

 

Create IObject.jpg

 

Category.jpg

↧

COMMPR01 - Product Category not available when creating Service Product

June 15, 2013, 5:51 am
$
0
0

Hi All,

 

I have added the object family 401 to my category CAT_MAINT_SERVICES (part of hierachy H_SERVICES -> Service Products). Since that moment when I want to create a new service product this category is not available anymore. But still available is the other category (ID: CAT_SERVICE2) where no object family is assigned (see Picture 1).

 

I have assigned the hierarchies to the applications already: Cross-Application Components a SAP Product a Product Category a Assign Category Hierarchies to Applications (see Picture1).

 

Is it possible assign a object family only to one category of the same hierarchy but not to the other one?

 

Thank you

 

 


↧
Viewing all 1796 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>