Hi Guys,
I needed to setup below filter in subsciption so removed the existing one than created once again the new for cusotmer but the problem is that the low and high value field is not there in the filter setting field. what is the issue.
The object is created as intelligent.I just wanted to stop Bdocs creation for some a perticulat number range.
Thanks
prem
Hi Experts,
I get this error when replication the Organization Unit created in transaction BP from CRM to ECC.
The error is generated in ECC system and Error Class is CVI_EI.
Any ideas.
Kind Regards,
Gaurav
I have been requested to delete some customers from or CRM.
When tryin to delete the BP following message is diplayed:
AM266 - Personal address not deleted; other reference exists
I am trying to debug the deletion events but its quite complexe
On data side our bps have no addres details I have been able to delete them.
I have checked several notes for address consistency check and they look write ADRC, ADRP
Have your ever face this issue? Any hints?
Regards
Thanks
Narendra
Hi,
In our pricing procedure we have one condition type created in CRM and we are maintaining condition record using /SAPCND/GCM t-code. created another condition record starting with current date and delimited the previous one for the past date. But the problem is that when we are creating the transaction system is picking up th eone which is valid for past date .
any help is appreciated .
Thanks
Sonia
Hi Everyone,
I am stuck with Loading of Data in Middleware.I am not getting the basics of Middleware.Exactly I wanted to know what is the difference between Initial load and Delta load?Please explain in detail with an example so that I can work on it in a much better way.
Thanks
Puneet
HI
We have a requirement wherein we need to download sales area data of the Equipment from ECC to CRM.
Is it possible to do in standard SAP way?
regards
AR
I have a requirement to trigger an event after customer master data is replicated in CRM from ECC.
Customer master data is created/changed in ECC and there is no auth for users to change it in CRM.
Whenever customer master data is created/updated, an event should be triggered.
What is the best way to accomplish this?
Hi Team,
Need your kind attention,
While migrating data to CRM, update request is now stuck in updating status and its pilling up and reached 10 lakh limit. This error has further stopped the billing at stores and they are unable to create Sales orders. This data is not getting released from queue from 7/12/2014. Need suggestions to cure this problem as it is impacting business.
Following steps have been done to check this activity.
We have used Se38 to run program in background, to pick the data and create BP in CRM. Its update request gets updated in SM13 and we need guidance to move this data so BP can be created in system.
Pls help its urgent.
Hi All,
I am downloading Customer Master from ECC to CRm and I am getting error Customer District Missing. I have tried with Request Load as well but same error is occuring.
Regards,
V Rao
Hi experts,
Can you please help us clear this bdoc error:
Partner XXXXXXXXXX
Customer district missing
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
We already tried to request load for that customer but same bdoc error is reoccuring in middleware. Thanks!
Regards,
Mike
Hello,
in our demo system the duplicate check is only executed when the address data like the country field of a contact is filled.
I expect the execution at that moment when the name of the obviously duplicate is filled and the button "enter" is pressed.
Best regards,
Marcel Brake
Sometimes when we do data upload from CRM to ERP and get ERP errors, we want to debug into ERP from the LUW in CRM outbound queues.
Usually we do this by de-registering the RFC destination in the outbound scheduler in SMQS. However, this is sometimes incovenient because all outbound queues for this RFC destination is stopped and this may affect other users, and also you may not be authorized to de-register the queues.
Therefore now we introduce a way to debug the outbound queue without de-registering.
Please refer to the following steps:
(1)set a breakpoint in method CL_SMW_MFLOW->PROCESS_OUTBOUND at line 37 (after calling cl_smw_mflow-> set_header_fields).
If you are updating the application data in SAP GUI, please set a session breakpoint.
If you are updating the application data in SAP WebClient UI, please set an external breakpoint. (If this external breakpoint is not called afterwards, please activate it in all servers in tcode SRDEBUG).
(2)Process the application data and save. e.g. Save after creating/changing business partners or business transactions.
(3)The program stops at the breakpoint.
Please change the variable "ls_header-dbgmode" to value 'X' :
Then press F8 .
(4)Go to Tcode SMW01 to view the Bdocs. The Bdoc will have status "To be processed (Debug)".
Please enter "/h" to activate the debugger and then select the Bdoc and press the "reprocess" button.
(Please note that this is actually a "process" and not a "reprocess" because we set to debug mode and the Bdoc is not yet processed.)
(5) Then it goes to debug mode.
If you are using new debugger, please select the menu path : [Settings-> Change debugger Profile/ Settings]
Please set the flag "block sending" and continue.
If you are using classic debugger, please refer to the following screenshot:
After setting this flag, please press F8.
(6) In the popup, please press "yes".
(Please ignore this message because this is actually a "process" and not a "reprocess" because we set to debug mode and the Bdoc is not yet processed.)
(7)Go to tcode SMQ1 (or use the queue monitor in SMQS), you will find the queue is stopped with status "Ready" :
(8)double click on the queue name twice and you can debug the LUW now.
Press the "debug LUW" buton and then you debug into ERP. (This requires the RFC user to be "dialog" type.)
Hi All,
I am trying to transfer condition record for condition table 305 by using the adapter object DNL_CND_A305, queue is showing in green but condition
record is not updating in the crm system. even I tried adapter object DNL_CUST_CNDALL but it is not happening. someone tell me the solution
What is the difference b/w Initial load, Delta Load, Upload and Request Load ?
4. Request Load
Thanks
Narendra
Hi,
I'm getting Dump when Archiving the saved Search in WEB UI
It showing type cast error
| Exception Class | CX_SY_MOVE_CAST_ERROR |
| Error Name | MOVE_CAST_ERROR |
| Program | CL_BSP_PAGE_BASE==============CP |
| Include | CL_BSP_PAGE_BASE==============CM014 |
| ABAP Class | CL_BSP_PAGE_BASE |
| Method | IF_BSP_PAGE~SET_ATTRIBUTE |
| Line | 24 |
During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=ZL_BT115S_S_SLSORDSR_AC_CN00' is not compatible for assigning with the target type '\CLASS=ZL_BT115S_S_SLSORDERSR_CN00'.
I have checked both these context node classes they are under the component BT115S_SLSO and both are under different view.
There is no custom codes/changes inside these classes.
Could some one help me what should I do in these case?.
Thanks,
Gunasekaran.
Hi ,
I have a requirement to show pop up window while clicking the button
The popup window should have one Text filed (input filed) under that some custom text and YES/NO Button.
I don't have idea about how to display Custom message in View area under the input field.
Please help on this.
Hi All,
There are some terms of payment is missing in CRM which is exsiting in ECC.In CRM smw01 I am getting error like "Terms of payment XXX not available".
Initial down load already done.so I cann't do inital load again.
So my thought is that can I achive the same using request download(R3AR2 and R3AR4 ) using adapter object 'DNL_CUST_PRICE' .
Could you please help me in proper filter setting for requset download for 'DNL_CUST_PRICE'.
Thanks In Advance.
Thanks & Regards
RR Pradhan
Hello Experts,
When I try to open BP transaction in CRM for one of the business partner, I am getting the following error:
*Internal error - insert in sorted tabl ZADRP with 040000352161500010101 999912310002.
And we do not maintain any such custom table ZADRP
Also in CRMD_ORDER transaction in CRM, I get the error
Address not found (Sold-To Party <BP Number>) for all the CLIs in the list
Request your help to resolve this issue. Do we have some SAP note to handle such scenarios. It seems the data has become inconsistent.
Thanks,
Rohit
Hi,
Customer contacts in CRM did not download correctly from ECC and now I am trying to make a request download of a range of contacts. It's not successful with object BUPA_MAIN.
But if I make a change in ECC, the contact data moves smoothly to CRM with BDOC type BUPA_MAIN and QUEUE R3AD_CUSTOME0000000884
Please help.