Hi experts,

I need to upload product prince

could some one tell me where to put the condition price 0PR0 (in which table) for a product ?

Thank you

Best regards

Hi,

I setup integration betwee SAP CRM and SAP ECC and want to know what kind of customization or middleware settings should be done to download the following master data from ECC to CRM and vice versa.

Business Partners

Products

Organizational Data

Transactions

Please do needful.

Thanks and Regards,

Venkatesh

Hi,

Could you please let me know what kind of middleware settings should be done to integrate and replication of data between SAP CRM CIC with any legacy system. Please do needful.

Thanks and Regards,

Venkatesh

I placed an order using CRM E-Commerce, and the order was placed successfully.This order flows from CRM to ECC system.

When I checked for that order in the transaction CRMD_ORDER, I was able to find the order in CRM system.

On checking the transaction VA03 (also checked VBAK table) in ECC system, I couldnt find the order.

When I checked for the BDOC entries in the transaction SMW01, I couldn't find any entry.

Where can I check for the status of the order?

Getting the above errors while replicating sales orders to ECC from CRM. The connection test and authorization tests are working between the 2 communication users. Changes made in filters for adaptor ojects are successfully maintained. Initial load is activated for business partners (bupa_main). But initial is not getting activated for BUS_TRANS_MSG and PRODUCT_MAT. Also synchronizing loads are not getting activated. There is an error message saying specify source site and target site, even though the sites are already given.

When the qrfc is reprocessed, the error is changed to sent to receivers(not all have confirmed).

I have maintained the values in tables in ecc and maintained same numbers ranges and transaction type. Experts please throw some light on this issue.

Hello there,

I have a questions abut sap crm terriotry management.

We have migrated territory hierarchy from file and fill table CRMM_TERRATTRIB with attributes for rules. From that table should be rules for new territories created and activated by report CRM_TERRMAN_DATA_MIG.

In official help is written, after that, report CRM_TERRMAN_PROC_REL in initial mode will create relationships between territory and partners to the table CRMD_TERR_ACCREL.

But I have noticed that after CRM_TERRMAN_DATA_MIG run there are also records in CRMD_TERR_ACCREL already created.

1.) What does CRM_TERRMAN_DATA_MIG exactly do? Problem is, that this report run in dialog processes, not in background. Its create also records to the table CRMD_TERR_ACCREL before CRM_TERRMAN_PROC_REL. Is that behaviour correct? Is there some missig settings avoiding to create relationships in this step? When there is a large amount of partners this is highly time consuming.

2.) When are data inserted to the table CRMD_TERR_ACCREL?

3.) Is it possible to run CRM_TERRMAN_PROC_REL in parallel for inial mode...(runnig of this report is highly time consuming and its seems than new records to CRMD_TERR_ACCREL are not created).

Thanks to all experts for commentary.

Lubos

Hello Experts,

Can you please help me understand how we can configure SMOEAC to stop PArticluar transaction type stop replication to ECC please?

Also is it possible to stop the Particular Line item to stop the replication to ECC please? which means, it it has 2 line items, one of them should be sent to ECC. other one always stays in CRM.

Could you kindly let me know how it could be done please?

I m aware that we can use Distribution lock and disallowing I1054 but wanna know how it can be done from SMOEAC please.

Regards,

KP.

HI experts

Please please i have to upload opportunties and quotations into SAP CRM 7.0 Ehp2

Please could any one give me any informations about a zprograme to do it ? how to put the price and the amount ? how to link an opportunity with a quotation ?

I know there's such result in the forum but i need a clear one please.

Thank you

Best regards

Hi,

we are using Clientside GWI 10.30.01.05 and we have the following problem.

When we get a meetign request from an external user, the new appointment is not transferred to CRM.

Although it's marked for CRM and an Account and a responsible employeee  is assigned.

Does any one knows, if it works at all to synchronize external Meeting requests?

Thanks and best regards

Michael

Hi All,

While replicating the Account Master from CRM to R3, system is throwing an error "Country  not defined in system.Message no. F2013". When i enter the Values Country & Bank key in Bank Details Assignment Block then only system is replicating the Account to R3. Earlier system used to replicate the account properly from CRM to R3. we are getting this problem after the patch level updation in R3 system only.

1. Create a Account
2. Extend the Role to Sold to Party
3. Extend the Sales Area Data
4. Save the Account
5. Go to SMW01 check the Error
6. Enter the values Country=IN & Choose any Bank Key in Bank details Assignment Block
7. Save It
8. Go to SMW01 check the successfull Replication

Thanks and Regards,

Arun Basa

Hi Experts,

I’m Using standalone CRM system. Please advise if any issues transporting organization structure from Dev->QA->PRO on standlone environments

Regards,

Raju

Hi

I have a simple question.

How is it controlled in CRM 7 to trigger the upload from CRM to ECC, when a prospect becomes a Sold To and therefore should

be replicated to ECC?

Thank you

Rajev

Hello,

I have enhanced BUPA_REL BDoc with a custom field and I have problem with its replication to ECC. I checked event SMOUTIL2, custom data is available in  BAPIMTCS table. I also created function modules for 2 BTE in ECC - for DE_BALE and for CRM0_300. I debugged all user exits in ECC - custom relationship field is available when CRM0_300 is called. However, when execution comes to event DE_BALE it is already gone. I don't have the custom field in ERP, because I want to update a standard field - KNVP-KNREF and I thought I can do it directly in DE_BALE FM by changing idoc_data.

But BAPIMTCS table does not contain the needed data.

Please help.

Kind regards,

Desislava

Hi Experts,

I am facing a strange issue while downloading the equipment from ECC to CRM.

I did all the initial settings required for downloading equipment.

When I run the initial download ( with filter ) or request download for EQUIPMENT  - it is creating validate BDOC - CRM_EQ_DMBDOC with Green status. But it is not generating neither PRODUCT_INDOBJ nor CRM_IBASE_MESS queues. And there by not creating any IBASE or IOBJECT and equipment is not getting downloaded.

However, if I create any new equipment or change any existing equipment in ECC, it gets downloaded properly by triggering the Delta. It generates all the above 3 queues. And this confirms me that there no issues with initial settings.

What could be the problem. Appreciate any pointers to trouble shoot the issue.

Thanks,

Nitish

Hello Every one,

I have been seeing so many blogs and wiki's - I would like clarity with you on this Org Model in SAP CRM.

1. For Org Model in CRM - Do we have replicate ECC Org structure to SAP CRM ?

2. What is the difference between creating the Org Model manually in CRM and assigning ECC Sales Org Units under the Functions Tab of Org Unit .

Eg - Assinging Sales org 1000 , Distribution channel 10 and Division 00

Eg - Sales office 10 and Sales group 20

Your inputs are really appreciable.

Thanks in advance

Amrita

HI Guru's

Can you please any one send me the step by step setting for order replication from ecc to crm.

Kindly send me the step to step including the download objects as well.

Thanks

manu

Hi SAP CRM Experts,

I created a contact person in CRM and assigned to sold to party under relationship TAB , the contact person  was not assigned under contact person TAB in ERP for the same sold to party and i checked  the BDOC , it is giving the error as"Partially send, receivers have errors"  BDOC type :BUPA_REL and under error message "No jurisdiction code could be determined" , area :TAX_TXJCD.This is happening only for BRAZIL country and in CRM we don't have the field Jurisdiction Code to input the value.

But If i do the same from ERP , it is working fine and also when i enter the country , and Jurisdiction code it is asking "Jurisdiction code AM does not corresponding address entered" after giving some value to region ,it is fixed.

Is the jurisdiction code depends on region as well?

I would appreciate giving the solution ASAP.Maximum points would be awarded.

Best Regards

Succhi

Hello all,

I have a requirement to get groupware profile which is determined by the system for login user. i need to access the groupware profile via coding etc. inside groupware badi's, based on which i need to implement some logic.

i don't want to write the whole logic where system determine GWI profile based on country, logon lang., business roles etc. for the user based on some defined sequence, rather i would like to get this profile once it's determined for login user.

please suggest how to achieve it . thanks in advance.

Regards

Sumit Mittal

Many users from sales, service or marketing need to check here and there the change history of an account:

• You could get a call from a customer and need to check when the data it is talked about actually came into the system.
• You want to see when the last update of marketing attributes took place.

But what if you wait minutes until the change history is displayed? Or what if you miss some changes?

Consider the following improvements then:

Display of marketing attribute changes in the change history of an account (SAP Note 1970970):

With implementing this SAP Note you also see the changes of marketing attributes in the change history assignment block in the account and contact overview pages. Without this improvement you need to run a report separately for seeing the changes of marketing attributes.

Display of change history with increased performance (SAP Note 623177, SAP Note 1972182):

With implementing these SAP Notes you can reduce the waiting time until you can actually see the change history in the account and contact overview pages.

The SAP Note 623177 is absolutely required to reach the main performance increase. The SAP Note 1972182  can result in further performance improvements, especially in case you use the included feature to display the change history of a specific period of time, for example the change history since the last year. With that users can look much quicker for the changes they are interested in. Often they anyway have a typical period of time they need to look at. With the SAP Note 1972182 implemented they need to select only once this period of time. This selection is kept so that the user never needs to select it again but automatically get the change history of this period of time when opening the change history assignment block.

These SAP Notes are available for CRM 7.0 EHP1, EHP2 and EHP3.

In this blog, I would like to touch upon customizing object used to download customizing setup from ECC to CRM, related to Condition Master Data. I would also like to mention, most commonly faced issues/errors/mistakes during customizing download from ECC to CRM.

This may not include complete list of errors that may occur during customizing download of Condition Master !!! Also, solution might vary from one business scenario to another. So, please evaluate the situation before applying the solution mentioned here, which is mainly based upon my experience in this area.Also, some of SAP Notes mentioned here may look old but still they are of much relevance.

All objects (Customizing or Master Data), related to condition master, can be found using transaction R3AC5, in CRM.

Object DNL_CUST_CNDALL, can be used to download all the customizing related to condition master data from ECC to CRM, irrespective of usages like PR (Pricing), LI (Listings), PD (Product Determination), FG (Free Goods) etc. You can also find usage specific customizing object in this transaction. But, it is recommended to download total customizing, using object DNL_CUST_CNDALL. This object is responsible for downloading condition table structures, access sequences, condition types, pricing procedures etc. from ECC to CRM.

Please note that standard customizing object DNL_CUST_CNDALL, is responsible for downloading customizing data from ECC to CRM, from both client specific and client independent tables. Do not get confused this, with object DNL_CUST_CND, which downloads data from only client specific tables, from ECC to CRM. Tables which are client independent are delivered as 'Inactive' in this object DNL_CUST_CND. Also, do not try to download object DNL_CUST_CND, by changing inactive objects to active, which might generate inconsistencies!!!

To know which tables are cross-client and which is client specific, then SAP Note: 484073 - Customizing download of cross-client tables, can be referred.

After performing a customizing download of object DNL_CUST_CNDALL, you can refer transaction SLG1 with below details, to check for any possible errors occured during customizing download in CRM:

Object: COND_EXCHANGE

Subobject: CUSTOMIZING

From/To (Date/Time): <Date Range - Start of Download till Download Completed>

If you face any issues or discrepancies in condition master customzing in CRM, even after performing download of condition customizing object, logs are the first place to be checked, as described above.

SAP Note: 314542 - Messages in application log of condition exchange, can be referred here for some of possible errors.

Below are few important points/scenarios, to keep in mind/refer, with respect condition master data customizing or download from ECC to CRM:

• Never change any settings in standard delivered customizing object, which might cause inconsistencies.

         Refer, SAP Note: 696564 - Initial deletion of condition customizing table’s doesn't work.

• It is required to open the client for cross-client customizing, during download of customizing object DNL_CUST_CNDALL, to complete successfully.

         SAP Note: 969087 - Downloading cross-client Customizing objects, can be referred here.

• It is always recommended to create a separate download object for each A table (or a condition table of any usage). So one download object per table. Also, make sure that a table is associated to only one download object.

• Manual execution of report /SAPCND/RV12N001 is not needed afterperforming a customizing download from CRM 4.0 onwards. This report would berun automatically, during the customizing download. This reportcan be used to generate/delete a condition table in case of any inconsistency.

         SAP Note: 398078 - Customizing download and report /SAPCND/RV12N001,

         647151 - Report /SAPCND/RV12N001: Generation of condition tables, can be referred here.

• There is no delta download for customizing changes, from R/3. For any customizing changes done in R/3, it is required to trigger an initial load of customizing object DNL_CUST_CNDALL, to sync the changes to CRM.

• You want to define a condition table having standard field VKBUR (Sales Office) as one of its key field. Since there is no standard mapping for this field, table generation will not be successful.

         SAP Note: 674538 - Copying conditions for sales office VKBUR into CRM,

         can be referred here to know the additional steps required.

• You want to create a new table in R/3 with a standard field, which is not supported in CRM or with a new Z* field and then want to download this table to CRM using customizing download.

         SAP Note: 514952 - Download of customer-specific tables,

         335202 - Product hierarchy and condition interchange,

         1070997 - Condition download:Parameter BAdI CND_MAP_CNV_FIELD, can be referred.

• Also, make sure to generate the field catalogue using Transaction: /SAPCND/CTFC, after adding the fields and also make sure that Internal working set structure /1CN/WORKING_SET_I_D_CRM contains newly added fields. Any possible error messages during field catalogue generation, can be seen using transaction SLG1 with Object = COND_TECHNIQUE and Sub object = FIELD_CATALOGUE.
• Also, note that CRM communication structure CND_MAPT_ACS_REM_CUST, has enhancement category as 'Can be enhanced(character-like)'. This means that only C,N,D and T data types are supported for newly added fields. Data types like QUAN or CURR etc. are not supported.

• Customer specific condition table was already downloaded to CRM earlier. But now, you have further enhanced the table in R/3 say adding/removing a new/existing field etc. And you are trying to bring down the modified version of table to CRM using customizing download. But table generation fails in CRM saying ‘Process BDocs first’.

       SAP Note: 423096 - Field catalog condition technique;incorrect messaging BDocs, can be referred.

• Also note that, while generating the field catalogue, there is a check on table T000 to check if the current system is Demo (D) or Live (P). If the current system is not either D or P, then the generation check is not done. But if current system is D or P, then generation check is done to check if there are any unprocessed BDocs and raises errors when found. This check happens via BAdI: /SAPCND/GENERATOR.

• If you are using a constant within an access sequence and if you observe some unexpected pricing result in CRM, then refer

         SAP Note: 726798 - Problems with constants in access seq. (/SAPCND/T682Z-QUDIW).

• You want to have your own logic defined for field conversion from R/3 to CRM. Refer,

         SAP Note: 534350 - Implementing BADI for Fields used during condition exchange.

• You want to use standard R/3 field KUNAG, within a condition table but field mapping do not exist in CRM and R/3 field KUNNR has been already mapped to sold-to-party field in CRM.

        SAP Note: 501567- Transferring conditions for sold-to party KUNAG to CRM, can be referred here.

• You want to use standard R/3 field MATKL, within a condition table but field mapping do not exist in CRM.

         SAP Note: 441083 - Transferring conditions for material group MATKL to CRM, can be referred here.

• If you are planning to do an upgrade or post-upgrade if you face any issues, then

        SAP Note: 683678 - System setting does not allow changes to Z objects,

        SAP Note: 1081025- Additional info for XPRA CND_XPRA_COND_OBJ_UPDATE can be referred.

• Costs (R/3 condition type VPRS) are not supported in the CRM order.

        SAP Note: 653046- Costs in CRM-pricing vs. R/3, can be referred to find a work around solution.

Below are some of the scenarios/issues you may face, during condition customizing download, with possible solutions:

If you face any such issues mentioned earlier, while performing condition customizing download, then its always better to apply the proposed solution, first in Test/Development/Quality system before applying the changes to productive client.

In my next blog, I will try to touch upon Condition Master Data download and upload as well.

Hope you find this blog useful

Your suggestions, feedback, comments on this blog are most welcome.